The Important Oil Water Separator Formula

Posted on Thu, Jul 21, 2011 @ 10:24 PM
Of course there are several math equations that are important to utilize when it comes to evaluating the appropriate size or style of oil water separator a certain application calls for. At Mercer we protect and hide the way we calculate and manipulate our Laws and Theories, much like the folks at Coca Cola keep their secret formula under lock and key. However there is one equation we have front and center in any conversation we have about separator design, and it's much less technical than the calculation of Reynolds numbers, equivalent diameter, oil droplet capture capabilities, or minimum rise rates. Far away from the neatly organized engineering and technical desks (where theoretical calculations about performance and functionality are being tested via sharp pencils and calculators ),a Mercer International derived formula is making the complex simple to understand in a "boots on the ground" practical manner.

Oil + Solids + Time = SLUDGE 

It would be so much easier if we could simply calculate a flow rate, run some viscosity and specific gravity numbers on the types of oils present in a certain wastewater, and easily come up with a suitable product.  But the fact remains that real life applications are not at all like the perfect scenarios laid out on the 

The most important consideration is the affect the solids present will have on the functionality of the oil water separator. Calculations made that kick out ideal surface area numbers and rise rates are only the first half of the evaluation process. The amount of solids present is the most important consideration; and even more important is the way a potential oil/water separator design is positioned to handle this solids loading.  Even the smallest amounts of solids can present enormous maintenance problems, reduced efficiencies, and lead to drastically more expensive lifecycle costs.

Mercer International has dubbed its Compliance Master™ Oil Water Separators "High Performance" because of the coalescing separation design improvements that were made to process out the solids (as opposed to simply push them through the pack). The outright removal of the solids is the most important way to ensure the resulting effluent is not just compliant...but compliant for a prolonged period of time.

Just because your less expensive purchase based on the sharpened pencil looks like this:

Plastic Coalescer

Doesn't mean you don't have to consider what you are going to do in 10 days when it looks like this:

clogged oil water separator

 

 

Tags: Oil Water Separator, High Performance, Sludge, o+w+s=sludge, maintenance, plugging solids